Payment & Shipping Terms:
|Copper Thickness:||1oz,1/2OZ 1OZ 2OZ 3OZ,1 Oz,2oz,1.5oz||Base Material:||FR-4,CEM-1,Aluminium,PCB Circuit Board,FR-4/Cluminum/Ceramic/CEM-3/RF-1|
|Min. Line Spacing:||0.1mm4mil),0.003",4mil,0.1mm,0.075mm =3mil||Board Thickness:||1.6mm,1.6mm-3.2mm,0.8mm,0.3~2.5mm,0.4~3mm|
|Min. Line Width:||3mi,4mil,0.1mm,0.1 0mm,0.075mm/0.075mm(3mil/3mil)||Min. Hole Size:||0.20mm,0.1mm,4mil-laser Drill,6mil,0.004"|
fr4 double sided pcb,
fr4 copper clad sheet
printed circuit board assembly and circuit board assembly services
|2||HDI Type||1+N+1, 2+N+2|
|3||Material||CEM3, FR-4, Halogen Free, Aluminum-based, Teflon,Rogers, Getek, Nelco, PTFE, Polyimide etc|
|5||Board Size||Max||600*1000mm (24"x40")|
|6||Copper Thickness||Outer layer||1oz~6oz|
|7||Min. Line Width/Space||4/4mil(0.1/0.1mm)|
|8||Finished Hole size||Mechanical||0.20~6.30mm|
|9||Blind/buried via(Mechanical)||0.2mm (min)|
|12||Hole Position Tolerance||±0.05mm (2mil)|
|13||Bow & Twist||≤0.75%|
|15||Thermal stress||288 degrees centigrade & 20 Sec|
|17||Soldermask color||Green, Red, B|
Features and benefits
1. The dielectric constant (DK) is low and stable, so the signal transmission is good without delay.
2. The characteristic of low dielectric loss makes the signal loss at a lower level, which makes the signal
transmission of the whole equipment excellent.
3. Delamination of copper foil will not be caused by the change of cold and heat due to the consistency
with the thermal expansion coefficient of copper foil.
4. Immersion gold has excellent surface planarity, particularly helpful for PCBs with BGA packages or even CSP mounted components to reduce failure rate during assembly and soldering.
5. UL, ISO certified PCB manufacturing factory.
6. Make delivery on time keeping 98% on-time-delivery rate.
7. Eligible products rate of first production: >95%
8. Experienced sales persons provide skilled customer services.
9. Fast and flexible to save the time of production from prototype to standard production
A. Excellent flexibility
B. Reducing the volume
C. Weight reduction
D. Consistency of assembly
E. Increased reliability
F. Controllability of electrical parameter design
G. The end can be whole soldered
H. Material optionality
I. Low cost
J. Continuity of processing
K. Professional and experienced engineers
L. More than 10 years of experience
High Frequency Singer Board PCB is applied to Touch screen, LED display soft board,Tablet antenna soft board.
Hot Tags: high frequency single board pcb, China, factory, manufacturers, suppliers, quotation, made in China
Contact Person: Lottie