2oz HASL Multilayer PCB Electronic Cigarette Printed Circuit Board
High precision prototype | PCB bulk production | ||
Max Layers | 4layers | 4 layers | |
MIN Line width(mil) | 2mil | 4mil | |
MIN Line space(mil) | 2mil | 4mil | |
Min via (mechanical drilling) | Board thickness≤1.2mm | 0.1mm | 0.1mm |
Board thickness≤2.5mm | 0.1mm | 0.1mm | |
Board thickness>2.5mm | Aspect Ration≤13:1 | Aspect Ration≤13:1 | |
Aspect Ration | |||
Board thickness | MAX | 5mm | 5mm |
MIN | 6 layers:0.55mm; | 6 layers:0.6mm; | |
MAX Board size | 580*900mm | 580*900mm | |
Max copper thickness | 4OZ | 4oz | |
Immersion Gold/ Gold Plated Thickness |
Immersion Gold:Au,1—8u” |
||
Hole copper thick | |||
Tolerance | Board thickness | Board thickness≤1.0mm:+/-0.1mm |
Board thickness≤1.0mm:+/-0.1mm |
Outline Tolerance | ≤100mm:+/-0.1mm 100< ≤300mm:+/-0.15mm |
≤100mm:+/-0.13mm 100< ≤300mm:+/-0.15mm |
|
Impedance | ±10% | ±10% | |
MIN Solder mask bridge | 0.05mm | 0.06mm | |
Plugging Vias capability | 0.25mm | 0.70mm |
The company advantage
Provides the World′s Quickest - PCB Board Design to Loaded Assembly. If getting your
design manufactured and to the marketplace first is critical to your success Pingyou
Industrial is a great solution. No one beats our New Product Introduction (NPI) and New
Product Development (NPD) capabilities. Zhongrun High-tech supports "ANY" or "ALL" of
your PCB Board: Design, Layout, Bare Board Fabrication, Assembly, and Complete Box
Build needs.
What′s critical to getting Your Engineering Design Built ASAP?
1. Get Pingyou Industrial team on-board early in the process. We are here to serve you
at every step of the process: From product conception thru. Manufacture of your design.
2. Provide complete information necessary to build your Design (See PCB Board Layout
Quote Page ). Missing or incorrect information/files can delay your project. At the
same time Pingyou Industrial team will assist you to developing any missing or
incomplete information for your Design, Layout, or Manufacturing Package.
3. Communication is Key - If your project is time critical - start the communication
process early. You will be amazed how working together can positively impact product:
Quality, cost, reliability, and cycle time reduction for NPI & NPD and production. It
also is a great support to building mature products that need to get done right.
4. If important to you provide a 24 hour contact name and number to keep your project
moving in the event of design, manufacturing, and/or documentation questions.
5. Once the PCB Board Layout is complete and sent to you, check it thoroughly and
release for fabrication and assembly ASAP.
Pingyou Industrial offers a World-Class service through utilization of its
comprehensive and totally integrated services. Years of fine turning processes and
systems have created seamless and efficient capabilities. We eliminate queue and ship
times between processes as only a "Single Source Solution" supplier can. Even with
fastest industry turn times the only way to minimize cycle time is teaming with a
single source that takes complete control of your product start to finish.
Advantages of multilayer circuit boards
In the design of high speed PCB, multilayer circuit board is generally used.Multilayer circuit boards are composed of multiple etched single or double panels bonded by lamination.Compared with single-layer and double-layer circuit boards, multilayer circuit boards have many advantages, especially in small electronic products.Let's share the advantages of multilayer circuit boards.
1, multi-layer circuit board assembly density is high, the size is small, with the electronic products are smaller and smaller, the electrical performance of PCB also put forward higher requirements, the demand for multi-layer circuit board is also increasing.
2, Multilayer PCB circuit board is convenient to lay the line, the length of the line is greatly shortened, the line between the electronic components is reduced, but also improve the data signal transmission rate.
3, for the high-frequency circuit, after entering the ground, the signal line produces a stable low characteristic impedance to the ground, the characteristic impedance of the power circuit is greatly reduced, and the intercept effect is obvious.
4. For electronic products with high requirements on heat dissipation function, a metal core heat dissipation layer can be set on a multi-layer circuit board to meet the requirements of special functions such as shielding and heat dissipation.
Multilayer PCB circuit board applications
In terms of performance, multilayer circuit boards are better than single-sided and dual-panel, but the more layers, the higher the production cost, the longer the processing time, and the more complex the quality inspection.However, in the same area of the cost comparison, although the cost of multi-layer circuit board is higher than that of single-layer and double-layer circuit board, but considering the noise reduction factor, the cost difference between the two is not obvious.With the development of technology, there have been more than 100 layers of printed circuit boards, mainly used in precision aerospace instruments and medical equipment.
FAQ
Q1: What service do you have?
A: We are the factory. We have our PCB manufacturing & Assembly factory.
We can offer a one-stop service from PCB manufacturing to PCB assembling, testing, housing, and other value-added services.
Q2. What is needed for PCB or PCBA quotation?
A: PCB: Quantity, Gerber file, and Technic requirements(material, surface finish treatment, copper thickness, board thickness,...)
PCBA: PCB information, BOM, (Testing documents...)
Q3. What file formats do you accept for PCB and PCBA production?
A: Gerber file: CAM350 RS274X
PCB file: Protel 99SE, P-CAD 2001 PCB
BOM: Excel (PDF,word,txt)
Q4: What any other information should be offered except for the file?
A5: Following specifications are needed for the quotation:
a) Base material
b) Board thickness:
c) Copper thickness
d) Surface treatment:
e) color of solder mask and silkscreen
f) Quantity
Q5: What is your minimum order quantity?
A: Our MOQ is 1 PCS.
Q6. Shipping cost?
A: The shipping cost is determined by the destination, weight, packing size of the goods. Please let us know if you need us to quote you the shipping cost.
Q7: Are my PCB files safe when I submit them to you for manufacturing?
A: We respect customer's copyright and will never manufacture PCB for someone else with your files unless we receive written. Permission from you, nor we'll share these files with any other 3rd parties.
Q8: No PCB file/Gbr file, only have the PCB sample, can you produce it for me?
A: Yes, we could help you to clone the PCB. Just send the sample PCB to us, we could clone the PCB design and work out it.
Q9: What payment do you accept?
A:-Wire Transfer(T/T)
-Western Union
-Letter of Credit(L/C)
-Paypal
-Ali Pay
-Credit Card
We recommend bank transfer.
Q10: How to get the PCBs?
A: For small packages, we will ship the boards to you by DHL, UPS, FedEx, EMS. Door to door service! You will get your PCBs at your home.
For bulky goods more than 300kg, we may ship your PC boards by ship or by air to save freight costs. Of course, if you have your forwarder, we may contact them to deal with your shipment.
Q11. How about the delivery?
Usually, for sample order, our delivery is about five days. For small-batch, our delivery is about seven days.
For the mass production batch, our delivery is about ten days.
But that depends on the real condition when we get your order.
If your order is urgent, please contact us directly, we will make a priority to deal with it and do our best to give you a satisfied delivery time.
Q12: How about your factory production capacity?
A: we can provide 40000 square meter/month.
Q13: Which countries have you worked with?
A: US, Canada, Italy, Germany, Czech Republic, Australia, Japan, Spain, Portugal, France, Britain, Poland, Ukraine, Russia, Brazil, Argentina, and so on.
Q14: How do you ensure the final quality of the product
For PCB, we will use the Flying Probe Test, E-test, etc. for it.
For PCBA, we need you to offer us a method or test fixture for the function test. Before that, our inspectors will use a microscope and X-ray to check the IC foot welding or bad solder, etc.
Q15: Will you check my files before production?
A: Yes, our engineer will check your Gerber file and BOM list to avoid any mistake.
Q16: My budget is limited; can you provide solutions to save cost?
A: Yes, we can. For example, for PCBA: Replace the DIP components with SMD components, so it can narrow the PCB board size to save cost. Re-layout the PCB to reduce the size, it can save cost. Also, we can recommend alternative components.
Q17: Do you accept process materials supplied by clients?
A: Yes, we can provide the component source, and we also accept component from the client.
Q18: Can we visit your company?
No problem. You are welcome to visit us in Shenzhen.
Q19: I am delighted after I read your information, how can I start to purchase my order?
A: Fill in the form below and click the "send" button to send your order to us, or contact our sales on sales representative online!
Product packaging
CONTACT US AT ANY TIME